Therefore, the most important characteristics of brackets is the carrying capacity and the ability to changes in length. Bearing capacity of corbels plays a special role in the removal of large Half-timbered houses. In this case, either to increase the number of brackets (which gives a general rise in construction), or apply brackets with greater carrying capacity. To equalize the uneven walls, you must have a large number of giporazmerny, or use a bracket with a wide range of variable length. Both options allow you to depart from wall at a distance of 0,5 m. Brackets have an opportunity to significantly change their length, have all 3 types of size and length of each type of bracket is continuously adjustable within 13 cm, which allows to retreat from the wall to any required distance.

As a rule, new construction, the calculation of the size of a particular type of brackets is carried out at the design stage, based on the proposal that the walls are smooth. In carrying out the work often it appears that certain elements brought sizes may not provide the necessary alignment of the walls – have dozakazyvat other types of sizes, which ultimately leads to a general appreciation of the work. When the use of brackets with a much wider range in length, this problem does not arise. When analyzing the design features of the brackets and methods for their attachment to the wall is not unimportant factor is possibility of formation of thermal bridges. To solve this problem, use two approaches: the principle of "point contact", or reduction in the area of contact with the metal wall, and the use of different insulating gaskets.